Ford Ranger 30mm CB93,1mm

Instructions for mounting expansion pads.

Clean and degrease the contact surface of the washers with the hub. For correct assembly, it is necessary to first tighten the nuts transversely, for perfect centering of the washer. Always tighten with the wrench in a crosswise fashion, up to the maximum recommended torque. Perform the final tightening of the nuts with a torque wrench, with a force of 120-150 Nm. Use "screw glue" on the hub pins that the washers screw onto. Check nut tightness after 500 km and then after another 1000 km from installation. The pads are /without certificate/ intended for sports and hobby purposes and off-road use.